|
Part
|
Reason
|
Date
|
Cost
|
| Labour | Assemble Bottom End of Engine | 22 January 2009 | £1,115.48 |
| Labour | Fit Head and set up timing | 22 January 2009 | £390.42 |
| Piston Pin Bushing | Teflon Piston Bushing | 22 January 2009 | £73.63 |
| Labour | Remove Rod from Engine | 22 January 2009 | £55.77 |
| Labour | Machine Head Work | 28 January 2009 | £264.70 |
| Big End Shells | Two sets of Big End Shells different thicknesses | 29 January 2009 | £99.00 |
| Main Bearings | Two sets of Main Bearing Shells different thicknesses | 29 January 2009 | £165.36 |
| Thrust Washer | Spare Thrust Washer | 29 January 2009 | £9.11 |
| Small End Shells | Incase old rods were reused | 29 January 2009 | £12.15 |
| 2 × Extra Head Bolts | Only ordered 10 by mistake | 9 February 2009 | £9.47 |
| Custom Carrillo Rods | New design | 10 March 2009 | £1,158.16 |
| Labour | Remove old rods | 30 April 2009 | £65.21 |
| SPAL 14" Puller fan | Old pusher fan was not powerful enough | 3 May 2009 | £68.89 |
| Labour | Install new rods and pistons | 7 May 2009 | £190.60 |
| Labour | Install head and cams set timing | 8 May 2009 | £275.84 |
| Labour | Change cam timing | 14 May 2009 | £45.14 |
| Connector for Radiator | Needed to fit new radiator fan | 20 May 2009 | £4.51 |
| New clutch release bearing | Replace broken item | 3 June 2009 | £51.03 |
| 2 × New CV Joint gaskets | Needed to refit gearbox | 3 June 2009 | £51.03 |
| Labour | Fabricate brackets for battery tray | 2 July 2009 | £63.71 |
| Total Year Cost | £ 4,169.21 |
