|
Part
|
Reason
|
Date
|
Cost
|
| Labour | Install Autronic and wideband | 15 February 2008 | £1,521.15 |
| Wiring harness for coils | Needed for LS1 coil packs | 22 February 2008 | £65.03 |
| 5 × LS1 ignition coils | Needed as Autronic does not have igniter | 22 February 2008 | £130.59 |
| 5 × MSD ignition wires | Neeed to connect LS1 coils to spark plugs | 22 February 2008 | £45.45 |
| Labour to diagnose non start issue | Could not get car to start with Autronic ECU | 22 February 2008 | £125.39 |
| Labour to wire up ignition coil harness | Connecting coils to existing loom | 22 February 2008 | £188.10 |
| Labour for dyno tune | Tune engine with Autronic ECU | 22 February 2008 | £522.55 |
| Siemens 630cc/min injectors | Old injectors were maxing out on their duty cycles | 28 February 2008 | £180.24 |
| Spark plugs | Replace damaged iridiums | 14 March 2008 | £13.78 |
| 5 × MSD Coils | Upgrade LS1 coils | 14 March 2008 | £128.34 |
| Labour | Install plugs | 14 March 2008 | £25.45 |
| Labour | Install injectors | 14 March 2008 | £44.53 |
| Map engine with new injectors | Needed because injectors were larger | 14 March 2008 | £243.89 |
| LED rear lights with mirrored bulbs | Improve look of rear of car | 8 April 2008 | £267.84 |
| Red fog lens and clear bulb | Incase I need to fit a red fog light rather than a red buld in a smoked lens | 8 April 2008 | £14.91 |
| LED front side lights | Replace worn out bulbs | 10 April 2008 | £12.99 |
| Viper Alarm (5900 in US, 480XV in UK) | Alarm with pager | 13 April 2008 | £115.76 |
| Viper SST Remote | Spare keyfob | 13 April 2008 | £45.28 |
| Directed 506T Glass break sensor | Alarm accessory | 13 April 2008 | £9.43 |
| Directed 520T backup battery | Alarm accessory | 13 April 2008 | £14.57 |
| Directed 507M tilt sensor | Alarm accessory | 13 April 2008 | £16.69 |
| Directed 513T Mini Piezo Siren | Alarm accessory | 13 April 2008 | £4.53 |
| 16" SPAL pusher fan | Provide more space behind radiator | 16 April 2008 | £32.25 |
| 10 × NGK R5671 A7 Spark Plugs | Different design plugs | 16 April 2008 | £15.12 |
| 10 × NGK R5671 A8 Spark Plugs | Cooler temperature plugs | 16 April 2008 | £15.12 |
| MSD 34019 8.5mm Cable | Spark plug cable to make custom leads | 19 April 2008 | £21.83 |
| MSD 3301 × 3 Straight boot | Spark plug boots to make custom leads | 19 April 2008 | £9.19 |
| MSD 3304 × 3 45 degree boot | Coil boots to make custom leads | 19 April 2008 | £8.73 |
| MSD 8841 wire spacer | Connect together custom leads | 19 April 2008 | £6.13 |
| Lambda bung | Narrow band lambda not needed so plug hole | 19 April 2008 | £1.51 |
| HKS SSQ Blow off valve | Old valve isn't sealing completely | 21 April 2008 | £120.71 |
| HKS Weld on flange kit | Attach HKS blow off valve to intake piping | 21 April 2008 | £14.14 |
| HKS Weld on flange | Attach HKS blow off valve to intake piping | 21 April 2008 | £7.57 |
| 2.75" straight silicone connector | For new inlet piping | 21 April 2008 | £3.03 |
| 2.25" - 2.75" silicone transition | For new inlet piping | 21 April 2008 | £8.84 |
| 2.25" silicone hump | For new inlet piping | 21 April 2008 | £6.06 |
| 2.25" straight silicone connector | For new inlet piping | 21 April 2008 | £3.03 |
| 0.86 exhaust housing for turbo | Better breathing at higher revs | 21 April 2008 | £156.57 |
| Waterproof connectors | Used in wiring up LED lights | 23 April 2008 | £9.31 |
| Adjust radiator bracket | Move radiator back 1cm | 29 April 2008 | £34.70 |
| Radiator Cap | Replace leaking cap | 29 April 2008 | £5.78 |
| Radiator mounts | Extra needed to move radiator at top mounting position | 29 April 2008 | £12.57 |
| 6' of 0 Gauge earth cable | Needed to move battery to boot | 1 May 2008 | £14.88 |
| Gold plated ring terminals | Needed to move battery to boot | 1 May 2008 | £5.42 |
| Pair of battery terminals | Needed to move battery to boot | 1 May 2008 | £13.81 |
| 25' of 0 Gauge power cable | Needed to move battery to boot | 4 May 2008 | £127.29 |
| 8 Gauge ring terminals | Connect wires to battery cable in engine bay | 4 May 2008 | £5.30 |
| Power distribution block | Fuse box for boot, fuel pump and interior light | 14 May 2008 | £25.76 |
| Rebuild centre section of turbo | Blades were mangled from piston breakup | 15 May 2008 | £282.16 |
| JIC × 1/4" NPT Adapter | Connect Aeroquip fitting to turbo | 15 May 2008 | £0.73 |
| 90 degree Aeroquip fitting FCM4033 | Attach water hose to turbo | 15 May 2008 | £4.42 |
| High performance braided hose | Connect turbo water feed to radiator | 15 May 2008 | £36.62 |
| Nuts/Bolts/washers | Needed to mount MSD LS-1 coils | 21 May 2008 | £7.49 |
| Battery Tray | Stainless steel battery tray for boot | 22 May 2008 | £146.82 |
| Straight inlet pipe | New length made up matching turbo and no MAF | 22 May 2008 | £146.82 |
| Labour | Tear down motor | 4 June 2008 | £283.34 |
| Exhaust Manifold Gasket | Needed for engine rebuild | 20 August 2008 | £11.42 |
| 5 × Intake Valves | Needed for engine rebuild | 20 August 2008 | £88.02 |
| Flexible Shaft | Replaced stretched cable | 20 August 2008 | £10.80 |
| Accelerator Cable | Needed for engine rebuild | 20 August 2008 | £34.84 |
| 20 × Valve Seals | Needed for engine rebuild | 20 August 2008 | £11.70 |
| Timing Belt | Needed for engine rebuild | 20 August 2008 | £33.20 |
| Sump Sealer | Needed for engine rebuild | 20 August 2008 | £6.44 |
| Rear Main Seal | Needed for engine rebuild | 20 August 2008 | £34.28 |
| 3 × Oil Filter | Spares | 20 August 2008 | £18.19 |
| 10 × Head Bolts | Needed for engine rebuild | 20 August 2008 | £47.34 |
| 2 × CV Gaskets | Needed for driveshaft rebuild | 20 August 2008 | £14.21 |
| Intake Gasket | Needed for engine rebuild | 20 August 2008 | £26.42 |
| Cylinder Head Gasket | Needed for engine rebuild | 20 August 2008 | £37.75 |
| 2 × Sidelight Wiring Loom | Replace falling apart cable | 20 August 2008 | £62.30 |
| Oil Pump | Replace worn out pump | 20 August 2008 | £257.87 |
| Oil Pump Gasket | Needed for engine rebuild | 20 August 2008 | £10.15 |
| Exhaust Valve Guide | Needed for engine rebuild | 20 August 2008 | £15.14 |
| Crankshaft | Needed for engine rebuild | 20 August 2008 | £273.78 |
| Radiator Support Rail | Switch cooling fan position | 20 August 2008 | £8.82 |
| Various nuts and bolts | Needed for engine rebuild | 20 August 2008 | £75.92 |
| Labour | Check crank | 22 September 2008 | £30.94 |
| Labour | Remove pistons from rods | 29 September 2008 | £54.16 |
| Labour | Clean up head. Inspect springs, guides and seats | 3 October 2008 | £332.79 |
| Labour | Install 4 valves and CC head | 7 October 2008 | £116.09 |
| Labour | Remove valve guide seals from head | 10 October 2008 | £38.68 |
| Intake Valve | Needed for engine rebuild | 22 October 2008 | £18.66 |
| Trust Washer | Needed for engine rebuild | 22 October 2008 | £7.66 |
| Radiator Support Rail | Switch cooling fan position | 22 October 2008 | £58.72 |
| Custom JE Pistons | Replace broken pistons | 31 October 2008 | £832.86 |
| Custom Exhaust Valves | Replace damaged valves | 7 November 2008 | £220.14 |
| Labour | Resurface head and install guides | 3 December 2008 | £366.56 |
| Total Year Cost | £ 8,485.39 |
